Autobag R3200 Bagging Machine

Operating Options

• Footswitch
  Instead of using the start button, the cycle is activated via a footswitch. With this option, the operator can have both hands free during filling of the bag
• Hand Activation Sensor
  This sensor detects the presence of the operator’s hand above the loading area. Once the operator drops in the product and removes their hand from the loading area then the machine automatically cycles. This sensor eliminates a step in the packaging process, as the operator does not need to press a button or activate a footswitch to cycle the bagger.
• Product Detection Sensor
  When the product detection sensor detects the product in the bag, the seal bar closes and seals the bag. The sensor is mounted underneath the seal bar and can be moved along the load shelf.
• Adjustable Seal Bar Opening
  This option reduces the stroke of the seal bar to be slightly greater than the bag opening which increases the packaging speed. Ideal when using small bags.
• Articulating Bag Support
  This option supports the bag during the sealing process. At the end of the cycle, the load shelf tilts down at an angle, dispensing the bag to the next step of the packaging operation.
• End of Roll Sensor
  This sensor detects when the roll of bags is nearly empty and stops the bagger in order to allow a changeover to a new roll of film.
• Elevated Machine Frame
  The elevated machine frame is designed for those that have bags longer than 24” and want to put a conveyor underneath it. This option is also used for tall operators that want to pack products while standing, as the loading height would be greater than 36”.
• Increased Pass-Through Size
  For packaging items requiring an opening larger than the standard pass-through, the R3200 can be ordered with increased pass-through size.
• Bag Open Sensor
  The Bag Open Sensor assures that when a bag is in the load position it is open and ready to accept the product.
• 220V Operation
  With this option, the bagger will work with 220V single-phase electricity. This option is designed for packaging locations that do not have 120V available, or those that want to use a lower amperage circuit in conjunction with 220V.

Material Options

• Seal Flattener Fingers
  Seal Flatteners work to hold bag taut during sealing to minimise wrinkles. Bag in an open position before the bag is stretched for sealing.
• Air Expeller
  The air expeller is a plate with a foam pad. This device presses against the bag prior to sealing, removing excess air.
• Custom Air Expeller
  Designed to work with large bags and products to remove excess air from the bag.
• Static Eliminator
  This option removes static electricity that could be in the bags, The eliminator neutralises the static charge and is especially beneficial with thin bags.
• Adjustable Hole Punch
  Pneumatic punch that puts a small perforated hole (flutter vent) in the bag, allowing for excess air to escape.
• Film Perforator
  The film perforator has an upper and lower assembly which creates a vertical perforation along the complete length of the bag. This perforation allows air to vent out of the bag after it has been sealed.
• Film Guides
  The film guides assure that the packaging material goes straight into the bagger by keeping the film in a fixed position. This option is ideal for narrow bags and poly tubing.
• Fan Folded Bag Handler
  This fan-folded bag handler is designed for use with large bags folded in a box. A benefit of boxed bags is reduced changeover as more bags fit in a box when compared with bags on a roll.

Poly Tubing Options

• Bag Maker Assembly
  The bag maker assembly allows the R3200 bagger to use poly tubing, in addition to pre-opened bags on a roll. With poly tubing, the user can change the desired bag length at the push of a button since the bag is made on demand. The assembly applies a bottom seal to the tubing, as well as perforates and opens the material, prior to loading. When using poly tubing the R3200 will run up to 40 bags/min (dependent on bag size, gauge, and product).
• Print Registration Sensor for use with preprinted film to centre graphics on the finished package.
• A Horizontal Perforation option is used to create a perforation on the bag.
• Seal Bar with Hang Hole
  A seal bar that also creates a hang hole near the top of the bag to allow a package to be placed on a retail display hook.
• Chain Bags
  More than one bag or compartment can be made out of the Poly Tubing before being separated.
  A strip of bags can be made.
• Tear Notch
  This option creates a tear notch which allows a bag to be easily opened by the customer.

Printing Options

• Thermal Transfer Printer
  If users need to print large text, images, or barcodes on their bag, then a thermal transfer printer is the right solution. Our Videojet thermal transfer printers are available in various widths and have a print resolution of 300 dpi, to accommodate different printing requirements. Additionally, printing software is available in order to make print set-up a breeze.
• Inkjet Printer
  If users need to print small text, date, time, or logos on their bag then an inkjet printer is the way to go. This compact inkjet printer allows you to print information that is up to 1/2″ high by up to 36″ in length
• Label Printer Applicator
  Integrated label printer applicator ties into the warehouse management system to print and apply a label directly on the outside of the bag.

Product Loading Options

• Fixed Funnel
  The funnel guides the product into the bag. The funnel is mounted above the seal bars and can be used for manual or automatic filling. It is made of stainless steel and comes in a range of sizes.
• Accumulating Funnel
  The stainless steel accumulating funnel is designed to accumulate parts prior to being dropped into the bag. This type of funnel is optimal when a feeder is used. The accumulating funnel allows the feeder to keep feeding parts while the bagger cycles. It also ensures that multiple parts get dropped into the bag at one time, as the funnel only opens when the bag is in position
  
• Easy Load Bag Opener
  Several features in one. First, this system creates a square or rectangular opening for ease of loading the product into the bag. Second, the system physically grips the bag to support heavier products in the bag. Last, the easy load bag opener includes seal flattener fingers, which stretch the bag tight prior to sealing, minimising wrinkles in the seal area.
• Bag Holder
  The bag holder is useful for getting a straight seal when packing free-flowing bulk products. It can also be used as an anti-stick device to prevent light bags from sticking to the sealing bar.
• Sorting Table
  A prep area placed on top of the machine, allowing the operator to prepare the products that will be packaged.
• Sorting Table with Frame
  A prep area that is placed over the top of the machine. This provides a space for the operator to prepare the products that will be packaged.

Feeding Options

• Bowl Feeder Counter
• Vision Counter
• Weigh Count Sorting Table
  The Weigh Count Sorting table automatically dispenses the product into the bagger once the target count has been reached. The Weigh Count Sorting Table has an accuracy of 0.003 oz (0.1 g) and a max bucket weight of 6.6 lbs (3 kg).
• Kit Counting Conveyor
• Robotic Feeding
• Interface Port with Cable
  Allows the bagger to communicate to external devices. When integrating the bagger, it can be set to either master or slave mode. This option includes the integration cable.

Outfeed Options

• Bag Support Outfeed Conveyor
  Instead of a load shelf to support the bag, it is possible to use a bag support outfeed conveyor. This conveyor supports and lifts the bags during sealing, then the sealed bags are transported to the left or right side of the bagger. The conveyor can also be configured to transport bags backward underneath the bagger. This conveyor allows the operator to comfortably stand or sit in front of the bagger during packaging.
• Outfeed Conveyor
  The outfeed conveyor transports bags from the bagger up to table height. With every cycle of the bagger, the conveyor indexes one step. It consists of a horizontal section where the bag is dropped and an inclined section that has a height of approximately 35”. The height and angle of the inclined section are adjustable. The conveyor is made of stainless and equipped with casters. The outfeed conveyor is available in 10″ and 16″ widths. The conveyor can be put in front of the bagger, like in the picture, or to the side of the machine.

Maintenance Options

• Comprehensive Warranty
• Light Warning Tower
• Wifi Interface
• Spare Parts Kit
  This kit includes basic consumable and replacement parts for the machine. These parts include a PTFE seal bar cover, pressure rubber, and perforation knife

Safety Options

• Dual Touch Start Switch
  Two switches that must be touched simultaneously in order for the machine to cycle. This ensures hands and fingers are not in the seal area while the machine is cycling.
• Safety Circuit
• Light Curtain
  Prevents the operation of the bagger when the optical detection field is obstructed. Can also be used to trigger the start of the cycle, once the obstruction is no longer detected.

Other Options

• Touchscreen Cover
  A clear plastic cover that protects the touchscreen from dirt, dust, and damage.