The nitrogen-enhanced purging system 1000 Pumped enhances the dry gas purging process. This self-contained and portable nitrogen purging system simplifies equipment connection to the purge interface.

Equipment Sealing Verification

Users can configure the system to display dewpoint measurements and control values in Degrees Celsius or Fahrenheit, with pressure readings available in Kpa or psi.

The dewpoint monitor, incorporated into the system, assesses the dryness of the gas before the purging process. The dewpointstat feature determines the moisture content within the equipment, ensuring seamless gas and purging procedures.

The nitrogen blanketing system also comes with four integrated testing capabilities to verify equipment sealing standards, and pressure testing is possible within the range of 10.3 Kpa (1.5 psi) to 34.4 Kpa (5.0 psi), and the system provides a pressure leak rate display solution of 0.01 psi.

Automatic Dewpoint Monitoring

In cases where the dewpoint sensor is removed, the system monitors the dewpoint progress, automatically switches off, and isolates dry gas when the desired dewpoint level is attained.

Additionally, a data logger tracks dewpoint degradation, allowing users to calculate the water vapour transmission rate (WVTR) and water removal rate during the initial purging process.

The Nitrogen inerting equipment is compatible with global voltage and frequency ranges (100 to 230 VAC at 50-60 Hz), including a 24VDC version. This equipment can be used with applications involving image intensifiers, optical instruments, thermal imaging, underwater equipment, surveillance instruments and electronic housings.

  • Customisable dewpoint measurements, temperature units and pressure units
  • Offers four integrated testing modes for equipment sealing standards
  • Pressure testing from 10.3 Kpa (1.5 psi) to 34.4 Kpa (5.0 psi) with precise leak rate display (0.01 psi)
  • Integrated dewpoint monitor assesses gas dryness and enhances the purging process
  • Dewpointstat feature measures equipment moisture content for precise purging
  • Monitors and achieves the desired dewpoint to ensure efficient isolation of gas
  • Tracks dewpoint degradation for calculating water vapour transmission and removal rates
  • Operates on global voltages (100-230 VAC at 50-60 Hz) with a 24VDC option
  • Ideal for image intensifiers, optical instruments, thermal imaging, underwater equipment, surveillance instruments and electronic housings
  • Selectable Pressure Range: 10.3kpa/17.2kpa/34.4kpa
  • Display Range Pressure: 0 to 34.4kpa
  • Display Range Dewpoint: +20 to -80 degree/ +68F to -94F dewpoint/0.1 degrees
  • Resolution: 0.1 degrees dewpoint
  • Accuracy: +/- 2 degrees dewpoint
  • Data Output Pressure: 0-5 volts
  • Data Output Dewpoint: 0-5 volts
  • Power: 100-230 volt 50Hz – 60Hz
  • Power Consumption: 3 Amps
  • Dimensions (W x D x H) : 490 x 425 x 190 (closed)
  • Weight: 15kg
  • Ingree Protection: 1P54 (closed case)
  • Operating Temperature: -10ºC to 50ºC
  • Storage Temperature: -50ºC to 65ºC
  • Proof Pressure Input: 137kpa (20 psi)
  • Flow Rate: 20 litres/min

Nitrogen Enhanced Purging System 1000 Pumped Product Brochure: Download