Description

The outward relief valves are designed especially for relieving pressure in both electric and electro-optic equipment and standards settings from 0.5 psi to 5.0 psi. It is typically used for safety valves and pneumatic pipelines.

M20 Thread Outward Relief Valve

This panel mounting outward relief valve is ideal for protecting equipment from vacuum damage. It comes with a back nut and a alochrome thread for R.F. Screening Continuity.

M20 Thread Outward Relief Valve (8531)

Designed to protect equipment from vacuum damage, this valve is supplied with a back nut and o-ring for fitting, and has a PTFE coated stainless steel mesh to act as a filter and protect the valve from dust and contaminants. In addition, it has a alochrome thread for R.F Screening Continuity.

2” Thread Outward Relief Valve (Stainless Steel)

This unit is the largest stainless steel outward pressure relief valves available in Stream peak. They can be fitted with either Viton or Nitrile seals, allowing for a large flow rate. This valve can also be mounted in reverse positions to act as an inward relief valve. Commonly used with our tank vent dryers, the valves give additional protection to prevent blockages. The BSP thread indicates that they can be easily mounted into standard pipe fittings.

Flange Mounted Outward Relief Valve

Protecting equipment from Vacuum damage, this unit is protected by a mechanical guard. Additional filtration can be added but may affect the flow rate.

Push-Fit Outward Relief Valve

This small push-fit aluminium outward relief valve is capable of protecting equipment from vacuum damage.

Un-threaded Glass Loaded Nylon with Splash Guard Outward Relief Valve

This large push-fit nylon outward relief valve is capable of protecting equipment from vacuum damage.

M30 Thread Outward Relief Valve

This panel mounting aluminium outward relief valve protects equipment from vacuum damage. Depending on the requirements of your operation, this unit can be supplied in various pressure settings and has a filter on the inlet.

1.5″ BSP Thread Outward Relief Valve (Stainless Steel)

One of the largest inward pressure relief valves available, the 1.5” BSP Thread Inward Relief Valve can also be mounted in reverse positions to act as outward relief valves. Commonly used with our tank vent dryers, the valves give additional protection to prevent blockages. The BSP thread indicates that they can be easily mounted into standard pipe fittings.

10mm Diameter Push-Fit Outward Relief Valve

Used to protect equipment from vacuum damage, this valve is supplied with a stainless steel mesh to act as a filter and protect the valve from dust and contaminants.

1.5” BSP Thread Outward Relief Valve

One of the largest inward pressure relief valves available, the 1.5” BSP Thread Inward Relief Valve can also be mounted in reverse positions to act as outward relief valves. Commonly used with our tank vent dryers, the valves give additional protection to prevent blockages. The BSP thread indicates that they can be easily mounted into standard pipe fittings.

1.5 BSP Double Thread Outward Relief Valve

This relief valve comes with a large hexagonal head. One side is tapered and the other is parallel, allowing it to be installed in-line or connected to exhaust or intake. This unit can be easily installed with a socket or spanner and can be mounted in reverse position to act as outward relief valves. Commonly used with our tank vent dryers, the valves give additional protection to prevent blockages. The BSP thread indicates that they can be easily mounted into standard pipe fittings.

9/16-21 UNF-3B Thread

Specially designed to meet the need for a low-cost, one-way, pressure relief valve, this unit has a standard settings range from 0.5 psi to 3.0 psi or cracking pressure.

Các tính năng chính

Tính năng sản phẩm

  • Used for electric and electro-optic equipment
  • Reduce pressure in electric and electro-optic equipment equipments

Non - Return Valve Brochure

Download