The In-Transit Loggers are ideal for the monitoring of temperature-sensitive products such as food, chemical, and pharmaceuticals during shipment. They come with a patented Shadow Log feature that guarantees trip temperature is available even if the operator fails to start the unit. Capable of storing up to 3,823 data points, the logger records temperature reading once every 30 minutes while replacing the oldest data point with new data to ensure users will always have access to the most up-to-date temperature data. Trip reports are used to validate the safety and quality of products and document compliance with local and global regulations.
Depending on business needs, customising of logging parameters such as high and low alarm limits, delay start, and alarm delay, are also available. Stream Peak’s FlashLink® In-Transit Loggers is available in 4 different models:
The FlashLink® VU In-Transit Logger is a single-use device designed to allow users to access temperature data history without the need of stopping or downloading the data. The patented Shadow Log™ feature guarantees temperature history data even if the operator forgets to start the logger. It is packed in a highly visible yellow sleeve with easy-to-follow instructions, allowing the receiver to locate the logger easily. Stream Peak’s new FlashLink® VU In-Transit Logger is the ideal device for the recording of storage and transport conditions of temperature-sensitive products. It also features a large and easy-to-read LCD, providing immediate status information and trip statistics including upper and lower temperature limits, cumulative duration of any temperature excursions, highest, lowest and average temperature.
The FlashLink® VU In-Transit Logger is a single-use In-transit Data Logger widely accepted by most receivers and is an ideal cold chain management tool for tracking temperature-sensitive products during shipment. It is applicable on all outbound loads, allowing suppliers to consolidate their temperature recorders to one mode. This data logger eliminates the need to stock multiple brands in the shipping office, making inventory management easy and prevents the running out of any particular type of logger for a specific receiver.
The data logger is designed for use on shipments of products that require pre-configured alarm settings to alert receivers with a flashing red LED when the temperature exceeds 36°F/2°C or below 28°F/-2°C during transit. Mounted on a bright green shipping card, it is easy for receivers to locate the logger upon arrival, assisting in expediting the process of download trip information. The patented Shadow Log™ feature guarantees data even if the shipper forgets to activate the unit. The loggers are downloadable through the free FlashLink Data Management software, and reports are saved in PDF format for easy email and archive for record-keeping, traceability and to help comply with HACCP and FSMA (Food Safety Modernisation Act) requirements.
The FlashLink® VU In-Transit Logger is a single-use In-transit Data Logger widely accepted by most receivers and is an ideal cold chain management tool for tracking temperature-sensitive products during shipment. It is applicable on all outbound loads, allowing suppliers to consolidate their temperature recorders to one mode. This data logger eliminates the need to stock multiple brands in the shipping office, making inventory management easy and prevents the running out of any particular type of logger for a specific receiver.
The Model 20879 is factory configured with alarm settings to alert receivers with a flashing red LED when the temperature exceeds 41°F/5°C or below 33°F/0.6°C during sIt also has a 30-minute delay start and alarm delay. The loggers are downloadable through the free FlashLink Data Management software, and reports are saved in PDF format for easy email and archive for record-keeping, traceability and to help comply with HACCP and FSMA (Food Safety Modernisation Act) requirements.
The FlashLink® Mini In-Transit Logger is the go-to cold chain management device for monitoring temperature-sensitive and perishable products such as produce and prepared food, chemicals, and pharmaceuticals throughout the supply chain. Designed as a compact and single-use device, these loggers are capable of providing precise temperature recording between -40°F to 150°F (-40°C to 66°C). Trip reports are used to verify the safety and quality of products and document compliance with local and global regulations. Models are available in 15 and 75-day logging periods.
The FlashLink® Mini In-Transit Loggers feature a patented Shadow Log™ feature to ensure the trip temperature is available even if the operator forgets to start the unit. The logger records temperature readings once every 30 minutes for up to 2,823 data points, replacing the oldest data with new data readings continuously. Customising the device logging parameters such as high and low alarm hits, delay start, and alarm delay are also possible depending on application requirements.
Feature | Specification |
Measurement Range | -40°F to 150°F (-40°C to 65°C) |
Temperature Resolution | 0.1°F/°C |
Temperature Accuracy | ±1.0°F from 14°F to 77°F (±.5°C from -10°C to 25°C) ±2.0°F above 77°F (±1.0°C above 25°C) ±2.0°F below 14°F (±1.0°C below -10°C) |
Data Capacity | 3824 points |
Data Download Time | 5 seconds typical for 3800 points |
Factory Programmable | High & Low levels over the entire range, displayed on LCD |
Battery | (CR2032) 3V Lithium/18 months |
Logger Dimensions | 1.962” x 3.423” x .575” (50mm x 87mm x 15mm) |
Casing | ABS plastic |
Logger Weight | 1.6 oz. (45.36 grams) |
Shock Resistance | Withstands 3-foot (1 meter) drop to hard surface |
Certification | RTCA/DO 160 compliant, CE Mark, NIST traceable, ROHS Compliant |
Display | LCD, Red LED Alarm |
Waterproof Rating | IP56 |
Storage conditions | -4°F to 122°F (-20°C to 50°C) 0% to 95% RH w/o condensation |
System Requirements | Windows PC with a current operating system, FlashLink Data Manager, Adobe Reader |
Download Requirements | FlashLink 8-Pin to USB High-Speed Adapter Kit |
Feature | Specification |
Recording Period | 15 Days |
Logging Interval | 6 min |
Measurement Range | -40°F to 122°F (-40°C to 50°C) |
Temperature Resolution | 0.1°F/°C |
Temperature Accuracy | ±1.0°F from 14°F to 77°F (±0.5°C from -10°C to 25°C) ±2.0°F above 77°F (±1.0°C above 25°C) ±2.0°F below 14°F (±1.0°C below -10°C) |
Data Capacity | 3823 points |
Data Download Time | 5 seconds typical for 3823 points |
Alarms/Settings | High 36° F (2°C), Low 28° F (-2°C) Delay Start 30 min, Alarm Delay 30 min |
Battery | Coin Cell Lithium Battery |
Logger Dimensions | 1.962” x 3.423” x .575” (50mm x 87mm x 15mm) |
Casing | ABS plastic |
Logger Weight | 1.6 oz. (45.36 grams) |
Shock Resistance | Withstands 3-foot (1 meter) drop to hard surface |
Certification | CE Mark, NIST traceable, ROHS Compliant |
Display | °F Scale on LCD, Red LED Alarm |
Waterproof Rating | IP56 |
Storage Conditions | -4°F to 122°F (-20°C to 50°C) 0% to 95% RH w/o condensation |
System Requirements | Windows PC with a current operating system, FlashLink Data Manager software, Adobe Reader |
Download Requirements | 8-Pin to USB Adapter |
Feature | Specification |
Recording Period | 15 Days |
Logging Interval | 5 min, 40 sec |
Measurement Range | -40°F to 122°F (-40°C to 50°C) |
Temperature Resolution | 0.1°F/°C |
Temperature Accuracy | ±1.0°F from 14°F to 77°F (±0.5°C from -10°C to 25°C) ±2.0°F above 77°F (±1.0°C above 25°C) ±2.0°F below 14°F (±1.0°C below -10°C) |
Data Capacity | 3823 points |
Data Download Time | 5 seconds typical for 3823 points |
Alarms/Settings | High 41° F (5°C), Low 33° F (0.5°C) Delay Start 30 min, Alarm Delay 30 min |
Battery | Coin Cell Lithium Battery |
Logger Dimensions | 1.962” x 3.423” x .575” (50mm x 87mm x 15mm) |
Casing | ABS plastic |
Logger Weight | 1.6 oz. (45.36 grams) |
Shock Resistance | Withstands 3-foot (1 meter) drop to hard surface |
Certification | CE Mark, NIST traceable, ROHS Compliant |
Display | °F Scale on LCD, Red LED Alarm |
Waterproof Rating | IP56 |
Storage Conditions | -4°F to 122°F (-20°C to 50°C) 0% to 95% RH w/o condensation |
System Requirements | Windows PC with a current operating system |
Download Requirements | FlashLink Data Manager software #21026, Adobe Reader, CT USB Adapter #20711 |
Feature | Specification |
Measurement Range | -40°F to 150°F (-40°C to 66°C) |
Temperature Resolution | 0.1°F/°C |
Temperature Accuracy | ±1.0°F (0.5°C) From 32°F to 150°F (0°C to 66°C) ±2.0°F (1.0°C) over the entire range |
Data Capacity | 3823 points |
Data Download Time | 5 seconds |
Alarms/Settings | High & Low levels over the entire range |
LED Indicators | Flashing red for alarm, green for active |
Battery | Lithium Coin cell |
Logger Dimensions | 2.68”x 1.27” x 0.45” (68.07mm x 32.25mm x 11.43mm) |
Casing | ABS plastic |
Logger Weight | 64 oz. (18.14g) |
Certification | CE Mark, Calibration Traceable to N.I.S.T., RoHS Compliant, BSS 7061 Compliant |
System Requirements | Windows PC with a current operating system, Adobe Reader, FlashLink Data Manager software |
Download Requirements | 8-Pin to USB Adapter |