Liệu Pháp Ức Chế Ăn Mòn Bay Hơi Đặc Biệt Từ (VCI Specialty Solutions)

Liệu Pháp Ức Chế Ăn Mòn Bay Hơi Đặc Biệt Từ (VCI Specialty Solutions)

VCI Specialty Solutions are designed for usage in metal processing applications such as a lubricant, wash, final rinse, protection of closed systems (boilers, tanks, piping), and general metalworking uses.

Nox-Rust 5400

The Nox-Rust 5400 is a rust preventive oil incorporated with petroleum additives. It does not interfere with assembly sealers, adhesives, painting, welding, and cleaning solutions. It is easily removable via conventional cleaning methods and is also approved for use as lubricant/preservative on sheet and coil sheet by major automotive manufacturers.

  • Protection Time: 1-2 years indoors; 3-6 months outdoors protected
  • Appearance: Light oily/waxy
  • Metal Protection: Cold rolled steel; sheet metal stamping; automotive parts
  • Approvals: OEM approved as a weldable RP, a preservative, and lubricant
  • Also available in convenient 11 oz. aerosol spray

Nox-Rust 7100

A general use water-displacing stamping oil, the Nox-Rust 7100 is an essential solution needed for any plant operation with stamping operation that uses water-base cutting fluids. These companies typically manufacturers products including springs, machine tools, compressors, gears, driveshafts, precision parts, watch components, taps, drills, and parts for refrigeration, aviation, and transportation.

The transparent oil repels residual cutting fluids and will not clog stamping dies, which is a crucial benefit. It is also non-staining, which is another important quality for in-plant or cross plant processing. After application, it dries to a soft dry film which is barely noticeable, except for the sparkling luster it puts on treated metal. To apply the Nox-Rust 7100, users can dip, spray or brush the solution on metal surfaces. In most scenarios, removal is not necessary.

  • Protection Time: 3-6 months indoor
  • Appearance: Light, transparent, oily; dries to a transparent, non-discernible film
  • Metal Protection: Multi-metals
  • Approvals: OEM product
  • Also available in convenient 11 oz. aerosol spray

Nox-Rust 7800

Known as the go-to all-purpose lubricant, the Nox-Rust 7800 is not only capable of providing temporary corrosion protection but can also be used to un-seize a stubborn nut to ensure machines can run smoothly. Water-displacing, low viscosity lubricant, and a corrosion prevention solution, the Nox-Rust 7800 protects both ferrous and non-ferrous parts during storage and covered transit at a low film thickness. Mixing or preparation is unnecessary, and it is compatible with barium lube grease while functioning as an excellent lubricating oil for assembly parts. It features a unique capability to creep and penetrate very tight and hard-to-reach areas. When at -70°F, the Nox-Rust 7800 remains in a liquid state, making it applicable for military purposes as gun oil for firearms in cold climates. Nox-Rust 7800 is also ideal in transit and transportation industries, machined parts, and even routine maintenance shop use. To use the Nox-Rust 7800, apply by spray, dip, or brush. If removal is required, users can use mineral spirits, high-pressure steam, or hot alkaline wash.

  • Protection Time: up to 12 months indoor
  • Appearance: Light, oily film
  • Metal Protection: Steel; metalworking, precision parts – ferrous and non-ferrous
  • Approvals: OEM product

Nox-Rust 9300

A multi-purpose corrosion inhibitor additive for final stage rinse, the Nox-Rust 9300 prevents corrosion from occurring during shipment and storage of machined parts, tools, treated steel and assembles. To apply the Nox-Rust 9300, users can dilute it with water or petroleum solvent and apply it by dip, spray, or brush.

  • Protection Time: 3-9 months indoor
  • Appearance: Light, transparent liquid; dries to a thin, oily emulsion
  • Metal Protection: Steel
  • Approvals: OEM product

Nox-Rust 9700

The Nox-Rust 9300 is a synthetic, water-based rust preventive solution designed for use as the final and in-process RP additive. The additive removes dirt and debris from steel before mill oils are applied. Add to cutting fluids, metalworking fluids, or final stage rise. It is water-displacing and compatible with zinc and copper.

  • Protection Time: Limited indoor 1-12 weeks
  • Appearance: Straw coloured, clear, aqueous solution that dries to a thin, soft film
  • Metal Protection: Steel
  • Approvals: OEM product
  • Nox-Rust 5400
  • Nox-Rust 7100
  • Nox-Rust 7800
  • Nox-Rust 9300
  • Nox-Rust 9700

Enquire About Product